Torqeedo Electric Motor | Cruise 10.0 TS

Cruise motors are the electric outboard motor of choice for motorboats, dinghies and commercial users. All Cruise systems have a built-in GPS with onboard computer and display with speed and input power, state of charge and remaining range, with a compact, low-drag, and lightweight pylon due to advanced helical gear design. Cruise 10.0 T is a tiller-equipped 48-Volt, 20 horsepower-equivalent outboard perfect for boats up to 10 tons.

Please Note: Cruise 10.0 Tiller motors do not include batteries or chargers. We have the battery and charger options listed above. Lead acid batteries can be used with these motors, but please note, battery capacity information will not display on the motor when using lead acid batteries.

Motor Specifications

• Motor Type: Torqeedo Cruise 10.0
• Horsepower Equivalent: 20hp
• Battery: Two (2) Power 48-5000 Lithium Batteries (sold separately)
• Steering: Tiller
• Starter: Electric
• Shaft: 15″ Short
• Motor Weight: 133lbs
• Battery Weight: 80lbs
• Waterproof: IP67
• Warranty: 2 years for non-commercial use

Standard Features

Motor with tiller control, integrated onboard computer with display, emergency stop magnetic chip, connection cable set for two Power 48-5000 batteries (total length approx. 4.5 m) including main switch and battery terminal screws, 5-pin data cable (5m), standard propeller v22/p10k, and sacrificial anodes (Al).

The motor has been inspected and is ready to mount and run. Freight Shipping is
available from Grants Pass, OR.

SHIPPING:
We have a flat shipping rate with tracking to all states until 15 December 2023

Residential shipping with a Lift gate: $250
Commercial shipping: $300

NOTE – Please be sure to check all shipments for any potential damage during transit.
It is the sole responsibility of the receiving party to fully inspect the product at the time of delivery
for any potential damage. We recommend removing any protective wrapping to fully inspect the product
before the driver leaves. If damage did occur during transit, all damage must be noted on the Bill of
Lading in detail and SIGNED BY THE DRIVER. A copy of the Bill of Lading will need to be emailed or
mailed to Jack Frost Marine in order for a damage claim to be filed with the trucking company on
our customer’s behalf. When possible, please photograph the damaged product on the truck and off the
truck for evidence that will assist with a product damage claim. Damaged product must be held in the
customer’s possession for up to 2 months. The shipping company has the right to inspect and/or claim the
product if a damage claim is filed and/or paid by them.

WE ACCEPT TRADES ON LOCAL PICK-UPS ONLY.
Please provide photos and details of your trade-in along with any questions to info@jackfrostmarine.com